|उत्पत्ति के प्लेस:||चीन में बना|
|ब्रांड नाम:||Infinity Machine|
|Minimum Order Quantity:||1|
|Packaging Details:||Standard export wooden case with operation manual and video inside.|
|Delivery Time:||Shipped in 15 days after payment|
|Payment Terms:||D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||200 sets per month|
|Capacity:||5kgf,10kgf, 20kgf, 50kgf,100kgf||Load Least Display:||0.01 kgf or 0.01gf|
|Test stroke:||0~150mm||Stroke Least Display:||0.001mm|
|Motor:||Panasonic servo motor||Main unit dimension:||360x270x950mm|
|Main unit weight:||70kg||Power supply:||AC220V 10A or specified by user|
Automatic Electronic Product Tester Connector Fatigue Testing Equipment
The machine is used in the insertion and extraction force tests of various kinds of connectors. Equipped with an automatic axopetal device and the special fixture for all kinds of connectors, it can ensure accurate insertion and extraction force results.
The machine adopts the Windows program, which is easy to operate and can automatically store test data (such as load-stroke curve, load life die-away curve and test results) and all test conditions.
The machine also adopts high-precision load cell measurement and servo motor drive, which ensures accurate insertion and extraction force results, making it an essential detecting instrument in the development and research and quality inspection of connector manufacturers and finished products manufacturers.
Connector whole line insertion and extraction test
Connector single port insertion and extraction test
Connector insertion and extraction duration test
Connector single pin and plastic retention test
Connector normal force test
Connector clip compression test
Connector dynamic impedance test
Various tensile and pressure test
Connector dynamic impedance test (optional)
Full-automatic test method:
The tester only needs to input and store the test conditions of the test piece of a certain batch and the machine will conduct the compression and
tensile tests automatically;
With different fixtures, it can be used in various connector tests, such as the tensile and compression tests and the endurance and dynamic
impedance tests of R&D and IQC finished connectors. After the test, it can automatically store the test curves and data;
The load resolution can reach up to 0.01gf and the stroke resolution, 0.001mm.
The units of load such as N, gf, kgf and Lb can be switched freely, so can those of stroke such as mm and cm.
English, traditional Chinese and simplified Chinese are available, which shows good applicability.
Large memory space:
The test data (curves and data) can be stored in the computer hard disc (the data for every test can be stored in it, without no limitation on the
People-oriented design and user-friendly operation:
All test conditions are set on the computer picture: test load, stroke, times, speed, waiting time…
People-oriented report design:
The head of the report can be modified (both in English and Chinese) at any time. The report can be generated automatically. The machine
can print data and curve reports without your inputting them again.
Automatic test results judging and analysis:
You may input the upper and lower limit specification values of the compression or tensile load, and the machine can automatically judge
whether the test results pass or fail and analyze the results.
Roll curve display:
It can automatically generate tensile and compression curves. The insertion is positive value, while the extraction, negative value.
|Unit(Switchable)||kgf, N, Lb, gf|
|Load least display||0.01kgf or 0.01gf|
|Stroke least display||0.001mm|
|Test speed||0~ 600mm/min|
|Connector lifetime tests||5set|
|Motor||AC servo motor|
|Main Unit Dimension||W580xD370xH1140mm|
|Main Unit weight||92kg|
|Computer & monitor weight||13kg|
|Emergency stop time||100ms|
The fixture for fatigue test for 5 connectors: